Fujitsu esx ユーザーズマニュアル

Chapter 6  Setting Up the VMware ESX Server
  6.1  Setting Up for VMware vSphere

ETERNUS DX Disk storage systems User’s Guide -Server Connection- (iSCSI) for VMware® ESX

Copyright 2012 FUJITSU LIMITED

P3AM-3412-11ENZ0

6.1.4

Setting the Software Initiator

Enable Software Initiator in VMware ESX.

1

Select the [Configuration] tab on vSphere Client and click [Storage Adapters].

2

Select the target iSCSI Software Adapter and click [Properties...].

3

Click [Configure] on the [General] tab.

4

Select the [Status-Enabled] checkbox and click the [OK] button.

5

Confirm that the [Enabled] checkbox is selected under "Status" on the [General] 
tab and click [Configure] again.

6

Confirm that the iSCSI name is displayed in the "iSCSI Name" column and click 
the [Cancel] button.

7

Select the [Dynamic Discovery] tab and click the [Add] button.

8

Enter the IP address for the iSCSI port of the connected ETERNUS DX Disk 
storage system as the iSCSI server IP address, confirm that the port is set to 
"Port 3260" (default), and click the [OK] button.