Fujitsu esx ユーザーズマニュアル
Chapter 6 Setting Up the VMware ESX Server
6.1 Setting Up for VMware vSphere
6.1 Setting Up for VMware vSphere
ETERNUS DX Disk storage systems User’s Guide -Server Connection- (iSCSI) for VMware® ESX
26
Copyright 2012 FUJITSU LIMITED
P3AM-3412-11ENZ0
6.1.6
Checking the LUNs
The following procedure describes how to check LUN recognition using the vSphere Client.
Log in to VMware ESX from the vSphere Client, and then check whether the ETERNUS DX Disk
storage system LUNs have been recognized.
The procedure is as follows:
Log in to VMware ESX from the vSphere Client, and then check whether the ETERNUS DX Disk
storage system LUNs have been recognized.
The procedure is as follows:
Procedure
1
Use the vSphere Client to login to VMware ESX as "root".
2
Select the [Configuration] tab.
3
Select [Storage Adapters] from the [Hardware] list.
4
Select [Rescan...].
5
If the iSCSI Software Adapter (vmhba34 in this example) is selected from the
[Storage Adapters] area, the recognized devices will be shown in the [Details]
area, as follows.
[Storage Adapters] area, the recognized devices will be shown in the [Details]
area, as follows.
After selecting [Rescan...], VMware ESX should attempt to recognize
the ETERNUS DX Disk storage systems' LUNs again.
the ETERNUS DX Disk storage systems' LUNs again.