LXE MX5X ユーザーズマニュアル

Assembly 

17 

E-EQ-MX5CERG-F-ARC 

MX5X Reference Guide 

The MX5X can be purchased with a customer-installable pistol grip handle. The handle enables 
the user of the MX5X to hold the unit while pointing and activating the scanner with one hand. 
Pressing the trigger activates the scanner and functions the same as the Scan key on the keypad. 
With the handle installed the Scan key on the keypad remains active. The trigger duplicates the 
operation.  

The handle is built of a durable and flexible plastic that will not detach from the MX5X if the unit 
is dropped.  

The trigger handle is a mechanical device. Battery or external A/C power is not required for 
operation of the trigger handle. The trigger handle does not need to be removed when replacing 
the main battery pack. 

Either the trigger handle is attached to the MX5X or the handstrap is attached, not both. 

 

1. 

Place the MX5X, with the screen facing down, on a flat stable surface. 

2. 

Slip the L-shaped plastic hooks, at the top of the handle, into the slots on each side of the 
back of the MX5X and slide the handle downward until the screw holes are visible. 

3. 

Attach the pistol grip handle to the MX5X (as shown above) with the set of three screws 
and washers provided. 

4. 

Test the handle’s connection making sure the MX5X is securely connected.  

Periodically check the pistol grip handle for wear and the connection for tightness. If the handle 
gets worn or damaged, it must be replaced.