KYOCERA KM-2050 ユーザーズマニュアル
Preparation
2-4
BASIC OPERATION GUIDE
When loading A3 or 11 × 17"
(Ledger) paper, move the paper
length guide to the right end and
push it down, as shown.
(Ledger) paper, move the paper
length guide to the right end and
push it down, as shown.
NOTE:
The paper sizes are marked on the cassette.
5
Load the paper in the cassette,
the leading edge must be aligned
against the Paper Length Guide.
the leading edge must be aligned
against the Paper Length Guide.
IMPORTANT: Always adjust the
paper length and width guides
before loading paper to avoid
skewed paper feed and/or a
paper jam.
paper length and width guides
before loading paper to avoid
skewed paper feed and/or a
paper jam.
Ensure the paper is placed
securely against the paper length and width guides with no gap. A different
paper size may show on the message display if the guides are not adjusted
correctly.
securely against the paper length and width guides with no gap. A different
paper size may show on the message display if the guides are not adjusted
correctly.
Do not load paper above the fill
lines located on the width guide.
lines located on the width guide.
Ensure the side to be printed is
facing up and the paper is not
folded, curled, or damaged.
facing up and the paper is not
folded, curled, or damaged.
6
Place the Paper Size Sheet in the
slot to show the size of paper
inside.
slot to show the size of paper
inside.
Fill Lines