National Instruments pxi-pci-5114 ユーザーズマニュアル
NI PXI/PCI-5114 Specifications
8-Bit 250 MS/s Digitizer
This document lists the specifications for the NI PXI/PCI-5114 (NI 5114)
high-speed digitizer. Unless otherwise noted, these specifications are valid
for the following conditions:
high-speed digitizer. Unless otherwise noted, these specifications are valid
for the following conditions:
•
All filter settings
•
All impedance selections
•
Sample clock set to 250 MS/s
Typical values are representative of an average unit operating at room
temperature. Specifications are subject to change without notice. For the
most recent NI 5114 specifications, visit
temperature. Specifications are subject to change without notice. For the
most recent NI 5114 specifications, visit
ni.com/manuals
.
To access the NI 5114 documentation, including the NI High-Speed
Digitizers Getting Started Guide, which contains functional descriptions
of the NI 5114 signals, navigate to Start»All Programs»National
Instruments»NI-SCOPE»Documentation.
Digitizers Getting Started Guide, which contains functional descriptions
of the NI 5114 signals, navigate to Start»All Programs»National
Instruments»NI-SCOPE»Documentation.
Hot Surface
If the NI 5114 has been in use, it may exceed safe handling temperatures and
cause burns. Allow the NI 5114 to cool before removing it from the PXI chassis or PC.
Refer to the
Refer to the
section for operating temperatures of this device.
Contents
Sample Clock ................................................................................... 6
Phase-Locked Loop (PLL) Reference Clock................................... 7
CLK IN (Sample Clock and Reference Clock Input,
Phase-Locked Loop (PLL) Reference Clock................................... 7
CLK IN (Sample Clock and Reference Clock Input,