Namco Bandai Games 90500097 ユーザーズマニュアル
Page 30
6-6 Linking Two Machines
1.
Ensure that the power is OFF.
2.
Loosen the two pozi head screws retaining the link cover bracket, located
next to the mains-in socket on the rear of the machine, and remove the
link cover bracket.
next to the mains-in socket on the rear of the machine, and remove the
link cover bracket.
3.
Use the supplied link cables to connect each link board. (See Diag.)
4.
Set the link switches to “ON”, “EXT” and “ON”.
(Refer to 6-6-1 (below) “Setting the
Link Switches”)
5.
Refit the link cover bracket, passing the link cables through the slots in
the cover bracket.
the cover bracket.
6.
Turn the power to the machine “ON” and set the PCB ID settings.
(Refer
to Section 6-3-2 “Game Options” item (a).)
6-6-1
Setting the Link Switches
The link switches are for setting the connection between machines or seats.
ON
INT
ON
OFF
EXT
OFF
ON
INT
ON
OFF
EXT
OFF
ON
INT
ON
OFF
EXT
OFF
ON
INT
ON
OFF
EXT
OFF
Setting for one Machine
(2 seats)
Setting for two Machines
(4 seats)
IN
OUT
IN
OUT