Namco Bandai Games 90500084 ユーザーズマニュアル
Page
3. ADJUSTMENTS
3-1 Turning on the Power
After installing the machine, turn on the power. The power switch is located
above the mains inlet on the rear of the cabinet.
above the mains inlet on the rear of the cabinet.
3-2 Switches for Adjustment
Open the coin door to find the switches for adjustments, located on the service
bracket.
bracket.
1.
Service Switch
Press this switch to obtain game credits without incrementing the coin counter.
Press this switch to obtain game credits without incrementing the coin counter.
2.
Test Switch
Slide this switch "ON" to enter test mode.
Test mode allows game testing and the changing of game settings.
Slide this switch "ON" to enter test mode.
Test mode allows game testing and the changing of game settings.
(See "3-4 Test Mode" on page 8)
There are two DIP switches located on the PCB.
Switch 1 when set ON will enter the game into test mode. Always ensure this
switch is set to OFF and use the test switch on the service bracket for testing
the machine. Switch 2 when set ON will freeze the screen.
Switch 1 when set ON will enter the game into test mode. Always ensure this
switch is set to OFF and use the test switch on the service bracket for testing
the machine. Switch 2 when set ON will freeze the screen.
3-3 Volume Adjust
The volume control is located on the PCB. Turn the control to increase or decrease
the volume.
the volume.
COIN COUNTER
TEST SWITCH
SERVICE SWITCH
SERVICE BRACKET
1 2
Option Switch
Volume
48W extended
edge connector
edge connector
56W edge connector
(JAMMA)
(JAMMA)
PCB
7