Furuno gp37 ユーザーズマニュアル
7. OTHER FUNCTIONS
36
LIST
a) The following display appears after
pressing the [ENT] key at step 6.
STATION (NEAREST)
"*" denotes
user channel.
user channel.
[EXIT]
[USER]
310.0
29.1 nm
92
°
287.0
56.7 nm
134
°
292.0
160 nm
320
°
321.0
234 nm
134
°
302.0
426 nm
121
° *
Tx frequency of
beacon station
beacon station
Range (ref. only) and bearing from
ship to beacon station
ship to beacon station
DGPS beacon station list
b) Use the cursor pad to choose station
desired.
c) Press the [ENT] key.
8. Press the [MENU] key twice to finish.
Programming DGPS user channels
(stations)
(stations)
The user may program 20 DGPS beacon
stations from which to use in DGPS beacon
station selection. Whenever a new station is
constructed you can add it to the list.
1. Press the [MENU] key twice to open the
stations from which to use in DGPS beacon
station selection. Whenever a new station is
constructed you can add it to the list.
1. Press the [MENU] key twice to open the
menu.
2. Choose DGPS/WAAS and then press the
[ENT] key.
3. Choose DGPS STATION and then press
the [ENT] key.
4. Choose LIST and then press the [ENT]
key.
5. Choose USER and then press the [ENT]
key.
STATION (USER)
[EXIT]
[NEW?] [CLR?]
01
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
02
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
03
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
04
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
DGPS STATION (USER) list
6. Choose “NEW?” and then press the [ENT]
key.
STATION (USER)
NEW USER CHANNEL
FREQ :
310.0kHz
RATE :
200BPS
LAT
:
37
°59'N
LON
:
123
°00'W
EXIT? SAVE?
NEW USER CHANNEL (DGPS) set up menu
7. Press the [ENT] key, enter frequency of
the station, and then press the [ENT] key.
8. Press the [ENT] key, enter baud rate of
the station, and then press the [ENT] key.
9. Press the [ENT] key, enter latitude of the
station, and then press the [ENT] key.
10 Press the [ENT] key, enter longitude of
the station, and then press the [ENT] key.
11. Choose “SAVE?” and then press the
[ENT] key.
12. Press the [MENU] key twice to finish.
Editing DGPS user channels
1. Press the [MENU] key twice to open the
menu.
2. Choose WAAS/DGPS and then press the
[ENT] key.
3. Choose DGPS STATION and then press
the [ENT] key.
4. Choose LIST and then press the [ENT]
key.
5. Choose USER and then press the [ENT]
key.