Garmin gps 152h ユーザーズマニュアル

Appendix 



Do not try to navigate using simulator mode because the GPS 

receiver is turned off. Any satellite signal strength bars shown are 

simulations and do not represent the strength of actual satellite 

signals.
Simulator mode turns the GPS receiver off for use indoors or for 

practice using the chartplotter. The chartplotter does not track 

satellites in simulator mode.

 appears in the lower-left corner of the main pages to indicate 

that the unit is in Simulator mode.

1.  From any Main page, press 

 twice.

2.  Select 

 to set speed, track control, and position.

You can view the software version and the unit ID number for 

your chartplotter. You may need this information to update the 

system software or when speaking with a Garmin Product Support 

Representative.

1.  From any Main page, press 

 twice.

2.  Select 

, and press 

.

3.  Select 

.

Note: This procedure deletes all settings information you have 

entered.

1.  From any Main page, press 

 twice.

2.  Select 

, and press 

.

3.  Select 

.

The following formats are supported for connection of external 

devices: GARMIN proprietary Differential GPS (DGPS), NMEA 

0183 (version 2.3), RTCM SC-104 input (version 2.0).

GPBOD, GPBWC, GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, 

GPRMC, GPRTE, GPVTG, GPWPL, GPXTE, and Garmin 

proprietary sentences PGRME, PGRMM, PGRMZ, and PSLIB.