Intermatic pg4000 ユーザーズマニュアル

ON

OFF

Figure 1

Figure 5

Figure 3

Figure 4

Figure 2

NOTE: For convenience and working safety, these wiring
diagrams show installation on the load side of a breaker.
PG Series 4000, 4500 and 5000 systems may be installed
without an external breaker.  Refer to installation instruc-
tion number 4 on page 1.

1. Two Wire Closed Loop: Connect feed wire  to the Common (C)
wire and return wire to the Normally Opened (N/O) wire. During
normal operation, the contact will be closed between C and N/O.
The contact will open during an alarm condition.
2. Two Wire Opened Loop: Connect the feed wire to the Common
( C ) wire and return wire to the Normally Closed (N/C) wire.
During normal operation, the contact will be opened between C
and N/C.  The contact will close during an alarm condition.  
3. Three Wire Supervised Loop: Connect feed wire to the
Common (C) wire, one return wire to the Normally Opened (N/O)
wire and the second return wire to the Normally Closed (N/C)
wire.  During normal operation, the contact will be closed between
C and N/O and opened between C and N/C. An alarm condition
will reverse the condition. 
4. Consult the instructions for your specific monitoring system for
additional information.

2

Figure 6

Figure 7