Vulcan Materials ml-114836 ユーザーズマニュアル

— 8 —

A baffle (Fig. 2) is located on each end of the oven. It can be adjusted higher or lower to accommodate
the height of the product being cooked.

To raise or lower baffles:

1.

Loosen the two thumb screws (Fig. 2) - use insulated gloves.

2.

Readjust baffle height.

3.

Retighten the two thumb screws.

1.

Place product in utensils (if required).

2.

Set utensils or products on the entrance end of the belt; not in the oven tunnel.

3.

Remove utensils or products from the oven after they completely clear the oven tunnel.

The oven is equipped with a top and a bottom air distribution panel.

• These panels regulate the quantity of air on the top and bottom of the product that is being cooked.

• They have been adjusted at the factory for proper baking performance.

• Some products may need additional panel adjustments. This should be done by a Vulcan-Hart

authorized servicer.

Press main power switch OFF.

PL-41126-1

THUMB SCREWS

BAFFLE