Campbell Hausfeld CC640 ユーザーズマニュアル

•  Send_File <Station> <Filename> 

Sends a particular file to a station. 

•  Delete_File <Station> <Filename> 

Deletes a file stored in the datalogger. This is currently not supported on 
the CR10X datalogger. 

•  Retrieve_File < Station > < Filename > <Output Filename > 

This should be the only command required to collect images with the 
CR10X. The files sent to the CR10X by the camera have a unique 
filename by using a counter. To retrieve all images in memory simply use 
the wildcard character * for the JPG files: 

•  Retrieve_File <Station> *.JPG 

This will retrieve files that match the DOS type name entered. 
Other options for Retrieve_File include Force and NoDateCheck 

•  Force:  Will collect a file even if a file with the same name and date have 

already been collected. 

•  NoDateCheck:  Will collect a file with the same name only if the date is 

different. 

Images that are in the dataloggers memory can be viewed or collected on demand 
by using the File Control feature that is available under the Tools menu of the 
connect screen. Using the file control can also be useful for debugging purposes.  

In the case of the CR10XPB datalogger only the CPU device exists where files 
can be stored. In dataloggers such as the CR1000 Devices can include the CPU, 
USR and the CRD (compact flash module). The devices show up in the left hand 
side of the File Control panel. To view files of a certain device simply click on the 
desired device listed in the panel.