Chief Manufacturing CMA351 ユーザーズマニュアル

ページ / 8
 CMA351
Installation Instructions
2
DISCLAIMER
CSAV, Inc., and its affiliated corporations and subsidiaries 
(collectively, "CSAV"), intend to make this manual accurate and 
complete. However, CSAV makes no claim that the information 
contained herein covers all details, conditions or variations, nor 
does it provide for every possible contingency in connection 
with the installation or use of this product. The information 
contained in this document is subject to change without notice 
or obligation of any kind. CSAV makes no representation of 
warranty, expressed or implied, regarding the information 
contained herein. CSAV assumes no responsibility for 
accuracy, completeness or sufficiency of the information 
contained in this document.
 IMPORTANT WARNINGS AND 
CAUTIONS!
WARNING:  
A WARNING alerts you to the possibility of 
serious injury or death if you do not follow the instructions.
CAUTION:  
A CAUTION alerts you to the possibility of 
damage or destruction of equipment if you do not follow the 
corresponding instructions.
WARNING:  
Failure to read, thoroughly understand, and 
follow all instructions can result in serious personal injury, 
damage to equipment, or voiding of factory warranty!  It is the 
installer’s responsibility to make sure all components are 
properly assembled and installed using the instructions 
provided.
WARNING:  
Failure to provide adequate structural strength 
for this component can result in serious personal injury or 
damage to equipment!  It is the installer’s responsibility to 
make sure the structure to which this component is attached 
can support five times the combined weight of all equipment.  
Reinforce the structure as required before installing the 
component.
WARNING:  
Exceeding the weight capacity can result in 
serious personal injury or damage to equipment!  It is the 
installer’s responsibility to make sure the combined weight of 
all components located between the CMA351 up to (and 
including) the display/projector does not exceed 500 lbs 
(226.8 kg).
The weight capacity of the CMA351 may be LIMITED 
to the lowest weight capacity of any other component 
located between the CMA351 and the supporting 
structure!
DIMENSIONS