Cadillac deville 2005 ユーザーズマニュアル
3. Check both sides of the dipstick, and read the
lower level. The fluid level must be in the
cross-hatched area.
cross-hatched area.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way and turn the handle
clockwise. Reinstall the engine air cleaner/filter
assembly.
clockwise. Reinstall the engine air cleaner/filter
assembly.
How to Add Fluid
Refer to the Maintenance Schedule to determine what
kind of transaxle fluid to use. See Recommended Fluids
and Lubricants on page 6-12.
kind of transaxle fluid to use. See Recommended Fluids
and Lubricants on page 6-12.
If the fluid level is low, add only enough of the proper
fluid to bring the level into the cross-hatched area on
the dipstick.
fluid to bring the level into the cross-hatched area on
the dipstick.
1. Pull out the dipstick.
2. Using a long-neck funnel, add enough fluid at the
2. Using a long-neck funnel, add enough fluid at the
dipstick hole to bring it to the proper level.
It does not take much fluid, generally less than
one pint (0.5 L). Do not overfill.
one pint (0.5 L). Do not overfill.
Notice: Use of automatic transaxle fluid labeled
other than DEXRON
other than DEXRON
®
-III, Approved for the
H-Specification, may damage your vehicle, and the
damages may not be covered by your warranty.
Always use automatic transaxle fluid labeled
DEXRON
damages may not be covered by your warranty.
Always use automatic transaxle fluid labeled
DEXRON
®
-III, Approved for the H-Specification.
3. After adding fluid, recheck the fluid level as
described under “How to Check,” earlier in
this section.
this section.
4. When the correct fluid level is obtained, push the
dipstick back in all the way and turn the handle
clockwise.
clockwise.
5-23