Creative AWE64 ユーザーズマニュアル

ページ / 89
1-2 Setting Up Your Audio Card
Knowing Your Audio Card
Your audio card has the following jacks and connectors which allow you to attach 
other devices to your card:
Jacks are one-hole connecting interfaces whereas connectors consist of 
many pairs of pins.  Refer to the online User’s Guide, “Hardware 
Information”, for details on connector pin assignments.
4 MB 
DRAM 
DRAM Upgrade Connectors
Connect an optional memory 
daughterboard to increase the memory 
available to your audio card so that you can 
experience and enjoy high quality sound 
reproduction with SoundFont banks.
CD Audio connectors
Connect a CD-ROM drive using a CD 
audio cable.
PC Speaker connector
Connects your motherboard’s speaker connector 
(refer to “Redirecting PC Sounds to External 
Speakers” in the online User’s Guide for details).
Joystick/MIDI connector
Connects a joystick or a MIDI device. 
You can buy an optional MIDI kit that 
allows you to plug in the joystick and 
MIDI device simultaneously.
Modem connector
Connects any modem card that is 
specifically designed for this interface.
Line Out Left jack
Together with the Line Out 
Right jack, connects 
powered speakers or an 
external amplifier via RCA 
connectors for audio output.
Line in jack
Connects external devices 
(such as cassette, DAT, or 
Minidisc player) for playback 
or recording.
Microphone In jack
Connects an external 
microphone for voice input.
Line Out Right jack
SPDIF connector
Sony/Philips Digital Interface 
format connector. See 
Figure 1-2 for more details.
Figure 1-1:   The connectors and jacks on your audio card.