Daewoo sd-9500 ユーザーズマニュアル

28

■ The counter counts in real time from the point you load the cassette. This does not have to be its

beginning! The counter does not count unrecorded parts of the tape.

■ If you rewind beyond the zero position, the counter counts in negative values  (e.g. – 0:01:15).

Each time you press [DISPLAY] button,
1x: Time and date+current status 

Time and date 

2x: Counter+current status 

counter 

3x: disappear.

But if you press [CLK/CNT] button, clock and counter on display window
will change each other.

• If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.
• In case that the timer recording information is inputted in the received broadcasting signal , press the button

to display the VPS/PDC icon.

STOP   SP         PR01    ARD

14:00 14/10        E180  00:48

STEREO  ON

V

The player will wind to the position 0:00:00 and stop.

When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting
this function until you reach the correct length.

• Remaining time display is

only possible when the
cassette is loaded.

TAPE CONTROL

TAPE REMAIN

E-240  01:27

TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-

E-180
E-240
E-300

PR+/-:SELECT

OK:CONFIRM        SETUP:END

PR+/-:SELECT
OK:CONFIRM         SETUP:END

REW    SP                   
GO TO ZERO

0:02:13

Reset the counter.

COUNTER  RESET

0:00:00

: Your player dims its display when switched to stand-by mode. 

: Your player switches to stand-by when no tape is played and no station is received for more

than 5 minutes. 

29

You can play and record the program of 16:9 Wide-Screen format with this player . 
• 16:9 Set
-Auto : This video automatically detects the program format (16:9 or 4:3) and

records or plays this program in the same format.

-ON : The video will play or record all broadcasts in 16:9 format. 4:3 broadcasts will

be converted to 16:9 format.

-OFF : The video will play or record all broadcasts in 4:3 format only.

VCR SETUP

CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK

PR+/-:SELECT
OK:CONFIRM       SETUP:END

16:9 SET

AUTO
OFF
ON

PR+/-:SELECT
OK:CONFIRM       SETUP:END

• If you watch a program which is recorded by 16:9 wide screen format with

this player, your TV must have 16:9 wide screen function and you have to
connect TV and player with the A/V scart.  

If you press the [PLAY] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays
repeatedly the tape from the beginning to end parts. 

To release this mode, press the [

] button or mode operation button. (PLAY, FF, REW or STOP)

Call the player’s "MAIN SETUP", choose 
"VCR SETUP", then "LANGUAGE SET".

Select your language.
Confirm.

LANGUAGE SET

PR+/-:SELECT
OK:CONFIRM       SETUP:END

Press the [

] button for about 5 seconds. 

No buttons of front panel can be operated now and LOCK INDICATOR (“LOCK”)
will be displayed on window display. Keep your remote control in a safe place. 
To release child lock, press any button of the remote control.

Use only good quality tape cassettes with the VHS logo.
•Keep cassettes away from excessive moisture or dust, magnetic and electrical fields

(loud speakers and computer monitors, for example).

•Always wind the tape to the beginning when you have finished. Store with the full

spool at the bottom and with the cassette in its cover.

You can protect your precious recordings from being wiped by breaking out the safety
tab on the side of the cassette (some cassettes have a slide). Should you wish to re-use
the tape after removing the tab, cover the hole with adhesive tape.

PAL

ENGLISH
DEUTSCH
ITALIANO
ESPAÑOL
FRANÇAIS
NEDERLANDS