Brother HL-2400CEN ユーザーズマニュアル

CHAPTER 5 MAINTENANCE

5-35

This printer has two slots for an optional font cartridge and one slot for an
optional font card, flash memory card or HDD card. (Type III HDD cards
will only fit into card slot 2.)

If you have installed optional font card(s), you can use the fonts stored in
them as well as the resident fonts. For optional font cards, consult the
dealer where you purchased the printer.

If you have installed an optional flash memory card or HDD card, you
can save macros and fonts on it. For flash memory card and HDD card
operations and information, see “

✒  Notes

• 

Do not install or remove cards with the power on, or you may lose all
data and may seriously damage the card.

• 

For more information about these cards, consult the dealer where you
purchased the printer.

• 

For the latest information: 

Follow these steps to install or remove a cartridge/card:

1. Make sure the printer is turned off.

If the printer is turned on, be sure to press the 

 button to take the

printer off-line. If data remains in the printer memory, the 

 LED

stays on. Press the 

 button to print out the remaining data,

then the 

 LED goes off. Turn off the printer.

2. Insert an HDD card into slot 2 with the label facing to the right. It is

not possible to fit a card into slot 1 with a Type III PCMCIA card
fitted in slot 2.

3.  Fit a flash memory or font card into either slot 1 or slot 2 with the

label facing to the right. Make sure they are inserted correctly.

To remove a card, pull it out of the slot with the printer turned off.