Fujitsu p17-2 ユーザーズマニュアル

SCENICVIEW P17-2 / P19-2 / P20-2 

 

3 

The monitor can be turned from the "wide format" (landscape mode) into the "high format" position 
(portrait mode). 

Ê 

Grasp the monitor with both hands on the right and left edge of the casing, move it into the 
highest position and turn it clockwise until it is in the portrait position. 

 

 

You must use corresponding software (pivot software) so that the screen display is also 
shown in the portrait mode. This software is included in the delivery (CD-ROM) and must 
be installed on your computer. 

 

Ê 

In the OSD menu you have the option of switching the OSD manually from landscape mode into 
portrait mode (see section "Monitor settings using the OSD menu"). 

To reset the monitor to the landscape mode, the monitor must be turned counter-clockwise. The 
OSD display can be reset again in the OSD menu. 

The main switch at the rear and the ON/OFF switch at the front are used for switching the monitor on 
and off.  

 

► 

Switch the monitor on with the main switch (4) at the rear. 

 

 

 

 

1 =  Buttons for the OSD menu 

(On-Screen-display) 

2 =  ON/OFF switch 
3 =  Power indicator 
4 =  Main switch 

 

The power indicator (3) lights up blue when the monitor and computer are switched on. The power 
indicator lights up orange when the monitor does not receive a video signal or is in the energy saving 
mode. The power indicator goes off when the monitor is switched off.