Intel D425KT ユーザーズマニュアル

18  

 

The BIOS includes security features that restrict whether the BIOS Setup program can 
be accessed and who can boot the computer.  A supervisor password and a user 
password can be set for the BIOS Setup and for booting the computer, with the 
following restrictions:   
•  The supervisor password gives unrestricted access to view and change all Setup 

options.  If only the supervisor password is set, pressing <Enter> at the password 
prompt of Setup gives the user restricted access to Setup. 

•  If both the supervisor and user passwords are set, you must enter either the 

supervisor password or the user password to access Setup.  Setup options are then 
available for viewing and changing depending on whether the supervisor or user 
password was entered. 

•  Setting a user password restricts who can boot the computer.  The password 

prompt is displayed before the computer is booted.  If only the supervisor 
password is set, the computer boots without asking for a password.  If both 
passwords are set, you can enter either password to boot the computer. 

For instructions on resetting the password, see Clearing Passwords on page 36. 

Power management is implemented at several levels, including: 
•  Software support through the Advanced Configuration and Power Interface (ACPI) 
•  Hardware support: 

―  Power connector 
―  Fan header 
―  +5 V standby power indicator LED 
―  LAN Wake capabilities 
―  Instantly Available PC technology 
―  Wake from USB 
―  Wake from PS/2 devices 
―  PME# wakeup support 
―  Wake from serial port 

ACPI gives the operating system direct control over the power management and Plug 
and Play functions of a computer.  The use of ACPI with the Desktop Board requires an 
operating system that provides full ACPI support. 

The Desktop Board has a 3-pin chassis fan header.  See Figure 10 on page 33 for the 
location of the chassis fan header.