ZyXEL Communications prestige 314 plus ユーザーズマニュアル

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 

10-4 

Traffic Redirect 

Active 

Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic 
redirect setup. The default is No. 

When the Active field is Yes, you must configure every field in this screen 
unless you are using PPPoE or PPTP encapsulation (except Check WAN 
IP Address and Timeout).  

If you don’t configure these fields and are using PPTP or PPPoE 
encapsulation, then the Prestige checks the PPPoE channel or PPTP 
tunnel to determine if the WAN connection is down. 

Configuration:  

Backup 

Gateway IP 

Address 

Enter the IP address of your backup gateway in dotted decimal notation. 

The Prestige automatically forwards traffic to this IP address if the 
Prestige’s Internet connection terminates.  

0.0.0.0 

Metric  Enter a number from 1 to 15 to set this route’s priority among the 

Prestige’s routes (see Metric on page 10-1) The smaller the number, the 
higher priority the route has. 

15 

(default) 

Check WAN 

IP Address 

Enter the IP address of a reliable nearby computer (for example, your 
ISP’s DNS server address) to test your Prestige’s WAN accessibility.  

The Prestige uses the default gateway IP address if you do not enter an 
IP address here. 

If you are using PPTP or PPPoE Encapsulation, enter “0.0.0.0” to 
configure the Prestige to check the PVC (Permanent Virtual Circuit) or 

0.0.0.0 

Menu 11.6 - Traffic Redirect Setup 

              

 
 Active= 

Yes 

 Configuration: 
 

 Backup Gateway IP Address= 0.0.0.0 

 

 Metric= 15 

 

 Check WAN IP Address= 0.0.0.0 

 

  Fail Tolerance= 2 

 

  Period (sec)= 5   

 

  Timeout (sec)= 3 

 

 

Press ENTER to Confirm or ESC to Cancel: 

 

Press Space Bar to Toggle.