ZyXEL Communications prestige 314 plus ユーザーズマニュアル

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 

12-16 

Firmware and Configuration Maintenance 

Step 2.  After the "Starting Xmodem upload" message appears, activate the Xmodem protocol on your 

computer. Follow the procedure as shown previously for the HyperTerminal program. The 
procedure for other serial communications programs should be similar. 

Click Transfer, then Send File to display the following screen. 

After the firmware upload process has completed, the Prestige will automatically restart. 

       Menu 24.7.1 - System Maintenance - Upload Router Firmware 

  

     To upload router firmware: 

 

     1. Enter "y" at the prompt below to go into debug mode. 

     2. Enter "atur" after "Enter Debug Mode" message. 
     3. Wait for "Starting XMODEM upload" message before activating 

       Xmodem upload on your terminal. 

     4. After successful firmware upload, enter "atgo" to restart the 

       router. 

 
     Warning: Proceeding with the upload will erase the current router 

     firmware. 

              Do You Wish To Proceed:(Y/N) 

Type the firmware file’s 

location, or click  Browse to 

look for it. 

Choose the Xmodem 

protocol.

Then click Send.