ZyXEL Communications prestige 314 plus ユーザーズマニュアル

ページ / 225
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 
Log Descriptions 
 
Chart 2 System Maintenance Logs 
TELNET Login 
Successfully 
Someone has logged on to the router via telnet. 
TELNET Login Fail 
Someone has failed to log on to the router via telnet. 
FTP Login 
Successfully 
Someone has logged on to the router via ftp. 
FTP Login Fail 
Someone has failed to log on to the router via ftp. 
NAT Session Table is 
Full! 
The maximum number of NAT session table entries has been 
exceeded and the table is full. 
!! Phase 1 ID type 
mismatch  
The ID type of an incoming packet does not match the local's peer ID 
type. 
!! Phase 1 ID content 
mismatch  
The ID content of an incoming packet does not match the local's peer 
ID content. 
!! No known phase 1 
ID type found 
The ID type of an incoming packet does not match any known ID type. 
 
Chart 3 UPnP Logs 
LOG MESSAGE 
DESCRIPTION 
UPnP pass through Firewall 
UPnP packets can pass through the firewall. 
 
Chart 4 Content Filtering Logs 
CATEGORY LOG 
MESSAGE 
DESCRIPTION 
URLFOR 
IP/Domain Name 
The Prestige allows access to this IP address or domain 
name and forwarded traffic addressed to the IP address or 
domain name. 
URLBLK 
IP/Domain Name 
The Prestige blocked access to this IP address or domain 
name due to a forbidden keyword. All web traffic is disabled 
except for trusted domains, untrusted domains, or the 
cybernot list.