ZyXEL Communications prestige 314 plus ユーザーズマニュアル

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 

Hardware Installation & Initial Setup 

2-11 

Step 2.  Fill in the required fields. Refer to the table shown next for more information about these fields. 

System Name  Choose a descriptive name for identification purposes. It is 

recommended you enter your computer’s “Computer name” in this 
field. This name can be up to 30 alphanumeric characters long. Spaces 
are not allowed, but dashes “-” and underscores "_" are accepted. 

P314_PLUS 

Domain Name  Enter the domain name (if you know it) here. If you leave this field 

blank, the ISP may assign a domain name via DHCP. You can go to 
menu 24.8 and type "sys domainname" to see the current domain 
name used by your gateway. 

If you want to clear this field just press the [SPACE BAR]. The domain 
name entered by you is given priority over the ISP assigned domain 
name. 

zyxel.com.tw 

Edit Dynamic 
DNS  

Press the [SPACE BAR] to select Yes or No (default). Select Yes to 
configure Menu 1.1 – Configure Dynamic DNS (discussed next). 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to 
save your configuration, or press [ESC] at any time to cancel. 

To configure Dynamic DNS, go to Menu 1 – General Setup and press select Yes in the Edit Dynamic 
DNS field. Press [ENTER] to display Menu 1.1– Configure Dynamic DNS as shown next.  

Menu 1 - General Setup 

   System Name= ? 

   Domain Name= 

   Edit Dynamic DNS= No 
 

   Press ENTER to Confirm or ESC to Cancel: