ZyXEL Communications prestige 314 plus ユーザーズマニュアル
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Internet Access
3-9
Figure 3-5 Menu 3.2.1 — IP Alias Setup
Follow the instructions in the table shown next to configure IP Alias parameters.
Table 3-5 IP Alias Setup Menu Fields
FIELD DESCRIPTION
EXAMPLE
IP Alias
Choose Yes to configure the LAN network for the Prestige.
Yes
IP Address
Enter the IP address of your Prestige in dotted decimal notation
192.168.2.1
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
subnetting, use the subnet mask computed by the Prestige.
255.255.255.0
RIP Direction
Press the [SPACE BAR] to select the RIP direction.
Options are None, Both, In Only or Out Only.
Options are None, Both, In Only or Out Only.
None
Version
Press the [SPACE BAR] to select the RIP version.
Options are RIP-1, RIP-2B or RIP-2M.
Options are RIP-1, RIP-2B or RIP-2M.
RIP-1
Incoming
Protocol Filters
Protocol Filters
Enter the filter set(s) you wish to apply to the incoming traffic
between this node and the Prestige.
between this node and the Prestige.
Menu 3.2.1 - IP Alias Setup
IP Alias 1= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.