ZyXEL Communications prestige 314 plus ユーザーズマニュアル

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 

Remote Node Setup 

5-3 

My Login  This field is applicable for PPPoE encapsulation only. Enter the 

login name assigned by your ISP when the Prestige calls this 
remote node. Some ISPs append this field to the Service Name 
field above (e.g., jim@poellc) to access the PPPoE server.  

jim 

 My Password  Enter the password assigned by your ISP when the Prestige 

calls this remote node. Valid for PPPoE encapsulation only.  

***** 

Server IP  This field is valid for RoadRunner service type only. The Prestige 

will find the RoadRunner Server IP automatically if this field is left 
blank. If it does not, then you must enter the authentication 
server IP address here. 

 

Route 

This field refers to the protocol that will be routed by your 
Prestige – IP is the only option for the Prestige 10. 

Edit IP 

This field leads to a “hidden” menu. Press [SPACE BAR] to 
select Yes and press [ENTER] to go to Menu 11.3 - Remote 
Node Network Layer Options. 

Session 
Options 

 Edit Filter sets 

This field leads to another “hidden” menu. Use the [SPACE BAR] 
to select Yes and press [ENTER] to open menu 11.5 to edit the 
filter sets. See the Remote Node Filter section for more details. 

Once you have configured the Remote Node Profile Menu, press [ENTER] to return to menu 11. 
Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press 
[ESC] at any time to cancel. 

If you change the Encapsulation to PPTP in Menu 11.1, then you will see the next screen. Please see the 
appendix for information.