Fujifilm finepix 40i ユーザーズマニュアル

107

106

Specifications

●

Model: Digital camera FinePix40i

●

Image file Size: 2400

× 1800 pixels/1280 × 960 pixels/

640

× 480 pixels

●

CCD Sensor
1/1.7-inch Super CCD (with primary color filter),
2.4 million pixels in an interwoven pattern

●

File format
Still image: Design rule for Camera File system-

compliant (Exif ver.2.1 JPEG-compliant),
DPOF-compatible

Movie: Design rule for Camera File system-compliant

(AVI format, Motion JPEG)

●

Storage media: SmartMedia (3.3V)

●

Viewfinder: Real image optical

●

Lens: Super EBC Fujinon

●

Focus distance: f = 8.3 mm
(equivalent to 36 mm on a 35 mm camera)

●

Exposure control: 64 zones TTL metering, Program AE
(exposure compensation available in Manual mode)

●

Sensitivity: Equivalent to ISO 200

●

White balance
Auto-selected (7 modes selectable in Manual mode)

●

Focal range
Normal: Approx. 50 cm/1.6 ft. to infinity
Macro : Approx. 6 cm/2.3 in. to 50 cm/1.6 ft.

System

●

Number of standard shots/recording time for SmartMedia

✽ This shows the number of available shots or recording time for a formatted SmartMedia.

22 sec.

45 sec.

90 sec.

182 sec.

364 sec.

Movie

-----------

15 min.

30 min.

60 min.

Audio

(only for SmartMedia with ID)

128 kbps

-----------

18 min.

35 min.

70 min.

112 kbps

-----------

20 min.

40 min.

80 min.

96 kbps

-----------

Quality Mode

Image Data Size

MG-4S(4MB)

MG-8S(8MB)

MG-16S/SW (16MB)

MG-32S/SW (32MB)

165

331

Approx.

1700KB

Approx.

803KB

Approx.

328KB

Approx.

87KB

FINE

NORMAL

BASIC

MG-64S/SW (64MB)

189

663

File Size

2400

× 1800

640

× 480

NORMAL

Approx.

612KB

Approx.

312KB

101

198

1280

× 960

FINE

NORMAL

Nothing happens when I
use the camera buttons
and dial.

No image appears when
I press the “DISP” button.

There is no sound.

There is no picture or
sound on the TV.

• Camera malfunction.

• The Mode dial has been moved to another

setting.

• The battery exhausted.

• The Mode dial has been moved to another

setting.

• The camera volume is set too low.
• The microphone was covered during

recording.

• The A/V cable is connected.

• The A/V cable is connected during movie

playback.

• The camera and TV are connected

incorrectly.

• The TV input is set to “TV”.
• The volume on the TV is set too low.

• Use the “POWER” switch to switch the

camera on again.

• Remove the battery, re-insert them and

try again.

• Load a new battery.

• Set the Mode dial to the correct setting.

• Adjust the volume.
• Take care not to cover the microphone

when recording.

• Disconnect the A/V cable.

• Connect the A/V cable correctly.

• Connect the TV and camera correctly.

• Set the TV input to “Video”.
• Adjust the volume.

Cause

Remedy

Problem

Troubleshooting