Kenmore 110.4708, 110.4709 ユーザーズマニュアル

Each cycle has a preset Cycle Time, Water Temp, and Spin 
Speed. The preset settings provide the recommended fabric care 
for the selected cycle. See chart.

Press the selector of each available setting until the desired 
setting glows green.

Use this cycle to wash loads of no-iron fabrics such as sport 
shirts, blouses, casual business clothes, permanent press 
blends, cottons and linens, and synthetic fabrics. This cycle 
combines medium-speed tumbling, high-speed spin, and a load 
cooling process to reduce wrinkling.

NOTE: For the best energy performance, use the Normal/Casual 
Cycle.

Use this cycle to wash loads of sturdy, colorfast fabrics and 
heavily soiled garments. This cycle combines fast-speed 
tumbling, longer wash time, and extra high speed spin to shorten 
drying times. If the water temperature is lower than needed for 
this cycle, the heater will warm the water to the optimum 
temperature.

NOTE: Stain Treat is a default option for this cycle. To ensure 
best performance, the water is heated as the cycle progresses. 
This gradual heating assists in the removal of organic soils such 
as blood. Stain Treat must be turned off to change the modifiers.

This cycle is especially designed for cleaning loads of soiled 
white fabrics with the addition of bleach. Hot washing 
temperatures assure optimal bleach activity. An additional rinse 
provides optimal rinse performance to avoid chlorine residues on 
your laundry. This cycle combines fast-speed tumbling, longer 
wash time, and extra high speed spin to shorten drying time.

Use this cycle to clean heavily soiled colorfast fabrics. This cycle 
combines a very hot water temperature and fast-speed tumbling 
to help ensure the removal of heavy soils and stains. It is 
recommended that you set your hot water heater to 120ºF (49ºC) 
to ensure proper performance during this cycle. Extra high speed 
spin helps shorten drying time.

This is a combined cycle. See below for detailed instructions on 
each option. 

Use this cycle to rinse, drain, and spin your wash load. This cycle 
combines fast-speed tumbling and high-speed spin. If desired, 
you can reduce the spin speed by selecting the speed you want 
from the SPIN SPEED modifier.

■

Loads that need rinsing only.

■

Adding fabric softener to a load using the fabric softener 
dispenser.

Use this cycle to drain your washer or to drain and spin your 
wash load. The spin speed is preset to high. If desired, you can 
reduce the spin speed by selecting the speed you want from the 
SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, handwashables, and 
woolens should be drained with no spin or low spin to avoid 
fabric stress.

■

Select RINSE/DRAIN & SPIN cycle.

■

Press the 2ND RINSE button to deselect the rinse option.

■

Press START.

Use the Clean Washer cycle once a month to keep the inside of 
your washer fresh and clean. This cycle uses a higher water level 
in combination with liquid chlorine bleach to thoroughly clean the 
inside of your washing machine. This cycle takes approximately 
50 minutes to complete and should not be interrupted. See 
“Cleaning Your Washer.” 

IMPORTANT: Do not place garments or other items in the washer 
during the Clean Washer cycle. Use this cycle with an empty 
wash drum. 

Use this cycle to wash small loads of 2-3 lightly soiled garments 
that are needed in a hurry. This cycle combines fast-speed 
tumbling, a shortened wash time, and extra high speed spin to 
shorten drying time. Large wash loads will result in the machine 
increasing the wash time. 

(hr:min)

(Wash/Rinse)

Normal
(0:50)

Warm/Cold

High

Heavy
(1:35)

Hot/Cold

Extra High

Heavy 
(1:45)

Hot/Cold

Extra High

Heavy
(2:00)

Extra Hot/Cold

Extra High

N/A
(0:20)

Cool/Cold

Extra High

N/Al
(0:11)

N/A

Extra High

(2-3 items)

Light
(0:30)

Warm/Cold

Extra High

Normal
(0:30)

Cool/Cold

No spin

Normal
(0:35)

Cool/Cold

Extra Low

Heavy
(1:25)

Warm/Cold

Extra High

Normal
(0:55)

Warm/Cold

Extra Low