Chevrolet impala 2000 ユーザーズマニュアル

Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course shuts off
the cruise control. But you don’t need to reset it.

Once you’re going about 
25 mph (40 km/h) or more,
press the RESUME button
on your steering wheel.
You’ll go right back up to
your chosen speed and 
stay there.

There are two ways to go to a higher speed:
D Use the accelerator pedal to get to the higher speed.

Press the SET button on the steering wheel, then
release the button and the accelerator pedal. You’ll
now cruise at the higher speed.

D Press the ACCEL button on the steering wheel. Hold it

there until you get up to the speed you want and then
release the button. (To increase your speed in very small
amounts, press the ACCEL button for less than half a
second and then release it. Each time you do this, your
vehicle will go 1 mph (1.6 km/h) faster.)

The accelerate feature will only work after you set the
cruise control speed by pressing the SET button on the
steering wheel.

There are two ways to reduce your speed while using
cruise control:
D Press the COAST button on the steering wheel until

you reach the lower speed you want, then release it.

D To slow down in very small amounts, press the

COAST button on the steering wheel for less than a
half second. Each time you do this, you’ll go 1 mph
(1.6 km/h) slower.