Clarion CZ501 ユーザーズマニュアル

ページ / 34
6
English
Remove the DCP
The control panel can be detached to prevent 
theft. When detaching the control panel, keep 
it in the safety place and prevent scratches.
W e   r e c o m m e n d   t a k i n g   t h e   D C P 
(DETACHABLE CONTROL PANEL) with you 
when leaving the car.
1.   Press the [SRC 
 ] button (1 sec.) to turn 
off the power.
2.    Deeply  push  in  [OPEN
] button to unlock 
the DCP.
3.   Hold  the  side  popped  out,  remove  the 
DCP.
Attach the DCP
1.   Hold  the  DCP  and  ensure  that  the  panel 
faces towards you. Set the right side of the 
DCP into the DCP bracket. 
2.  Press the left side of the DCP until it locks.
Hold the DCP, as shown in the figure below, 
and put it into the supplied DCP case. 
Storing the DCP in the DCP Case
CAUTION
•   The  DCP  can  easily  be  damaged  by 
shocks. After removing it, be carefully not 
to drop it or subject it to strong shocks.
•   Once the [
OPEN
] button is pressed and 
DCP is unlocked, car vibrations can cause 
the DCP to fall
•   The  connector  for  the  main  unit  and 
DCP  is  extremely  important.  Be  careful 
not  to  damage  it  by  pressing  on  it  with 
fingernails, screwdrivers, etc.
Note:
If the DCP is dirty, wipe off the dirt with a soft, 
dry cloth only.
DCP case
DCP
CMB1525194A(Z501) manual.indb   6
2010-11-26   15:51:01