Chauvet scorpion lr-1510 ユーザーズマニュアル

 

¾ 

1 x Scorpion™ R 

¾ Warranty 

Card 

¾ User 

Manual 

¾ Power 

Adapter

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that 

all parts are present, and have been received in good condition. Notify the shipper immediately and 

retain packing material for inspection if any parts appear damaged from shipping or the carton itself 

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture 

must be returned to the factory, it is important that the fixture be returned in the original factory box 

and packing. 

To determine the power requirements for a particular fixture, see the label affixed to the back plate of 

the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating is its average 

current draw under normal conditions. All fixtures must be powered directly off a switched circuit and 

cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer 

channel is used solely for a 0% to 100% switch. Before applying power to a 

fixture, check that the source voltage matches the fixture’s requirement. 

Check the fixture or device carefully to make sure that if a voltage selection 

switch exists that it is set to the correct line voltage you will use. 

Not all fixtures have a voltage 
select switch. Please be sure to 
connect to the proper voltage. 

 

 

 

LR-1510 User Manual 

3

 

11/14/2007/18:54