Lenoxx tv502 ユーザーズマニュアル

IB-TV502(AX5033)-FD-E-051002

OPERATING ON TV

1. Selecting TV Band

Turn the FUNCTION switch to TV/VIDEO position. Then you may select a desired band by

sliding the BAND selector to different positions:

VL: to select the VHF low channel TV broadcast stations (channels 2 to 6)

VH: to select the VHF high channel TV broadcast stations (channels 7 to 13)

UHF: to select the UHF all channel TV broadcast stations (channels 14 to 83)

2. Tuning into Desired Station

You may tune into a desired station by adjusting the TUNING control.
3. Adjusting for Best Picture

If the picture is too bright or too dark, adjust the BRIGHTNESS and CONTRAST controls

(located on the back of the unit).
4. Vertical Hold

If the picture rolls up and down, adjust the VERTICAL HOLD control on the back of the unit.

You may enjoy your TV or radio sound

without disturbing others by a mono

earphone (not included).

USING AN EARPHONE

7

MONO EARPHONE

OPERATING ON RADIO

1. Turn the FUNCTION switch to RADIO position.

2. Turn the BAND SWITCH to the proper band you want.

3. Tune into a desired station by adjusting the TUNING control.

4. Turn the set itself to obtain best AM reception or adjust the TELESCOPING SWIVEL

ANTENNA for best FM reception.

VOLUME LEVEL

You may adjust the VOLUME control to get the sound level you like.