cat-eye ec3600e ユーザーズマニュアル

R

6

1

3

7

8

6

4

2

5

1

• Turn the level adjuster on the rear

leg so that the unit is placed stably.

• When the indication line on the

level adjuster is at the top, the rear
leg is at the same level as the caster
of the front leg.

2

• The seat position can be adjusted

while pulling up the seat lock pin.
When desired seat position is
obtained, release the lock pin free
and move the seat slightly and the
lock pin will click into the nearest
hole by spring pressure. Holes are
provided at an interval of 3 cm(1-3/
16").

Note:

When sliding the seat,

take care not to break the pulse
sensor cable.

R

EC-3600

indication line

level adjuster

lock pin

3 cm(1-3/16")

7

3

• The seat height can be adjusted at

your choice.

• Loosen and remove the seat height

lock knob, supporting the seat pipe
with the other hand.

• Move up or down the seat pipe to

the desired height and screw-in the
seat height lock knob. While
tightening the knob lift the seat
pipe slightly for easier screwing.
Holes are provided at an interval of
3 cm(1-3/16").

4

• It is possible to adjust the pedal belt

length according to your shoes size.

• A d j u s t   t h e   s e a t   p o s i t i o n   a s

illustrated. Find the position where
your knee is slightly bent when the
pedal is at the farthest position.

Remark:

W h e n   m o v i n g   t h e

main unit, lift the rear frame
holding by the seat height lock
knob, and roll the casters.

seat height lock knob

seat pipe

seat height lock knob

casters