Crestron caen-mk ユーザーズマニュアル

CAEN Mounting Kit 

 

Crestron CAEN-MK

11/32” Wrench or nut driver 

8-32 Nuts (quantity four, supplied) 

Complete the following assembly procedure in the order provided (refer to 
illustration below).  

1.  Holding the device facing you, position the bracket-mounting studs on 

metal bracket MTBK02857-1 in the device’s mounting holes as shown 
in the following diagram. 

2.  Slide the metal bracket through the device’s mounting holes. 

3.  Using an 11/32” wrench, secure the two nuts (supplied) to the 

mounting studs on the metal bracket.  

4.  Repeat for the other bracket. 

METAL BRACKET
(MTBK02857-1)

METAL BRACKET
(MTBK02856-1)

NUTS, KEPS

8-32

 

•  CAEN Mounting Kit: CAEN-MK