LaCie 2 ユーザーズマニュアル

LaCie Network Space 2 

• DESIGN BY NEIL POULTON

 

Accessing & Transferring Files

User Manual 

page 25

The Network Space 2 can be connected to your network via Ether-
net or directly to a computer via USB.  This chapter explains how to 
connect your hard drive to a computer.  For details on connecting to 
your network, refer to chapter 

.

You must successfully connect to the network and run the Setup Wiz-
ard before connecting the Network Space 2 to your computer via 
USB.  Follow the steps in chapter 

 before 

continuing. Additionally, you will need to increase the storage al-
located for USB access by adjusting the USBShare size slider (which 
is set to 0GB by default) (refer to 

Follow these steps to getting your LaCie Network Space 2 connected 
to your computer:

 If your network is limited to 10/100 Mbit 

transfer speeds or if you use Wi-Fi, the USB connection will gener-
ally permit faster transfer rates.  In this case, LaCie suggests that as 
a first step you copy large quantities of files to the Network Space 2 
via USB, then as a second step, share them throughout your network 
via the Ethernet cable.

 If you connect your Network Space 2 to the 

network via Ethernet and to a computer via USB, note that USBShare 
will mount on the computer as a physical drive and will not appear 
on the network.