uline clrco2175 ユーザーズマニュアル

Prepare Site

Your U-Line product has been designed for either free-standing or 
built-in installation. When built-in, your unit does not require 
additional air space for top, sides, or rear. However, the front 
grille must NOT be obstructed and clearance is required for an 
electrical connection in the rear.

• Unit can NOT be installed behind a closed cabinet door.
• If you would like to align the face of the unit with other adjacent 

cabinet doors, you may need to alter the wall just behind the 
drain connection on the unit to accommodate the drain. 

Follow the cut-out drawing. The 24-1/4" width allows 1/4" for ease 
in installation and removal of the unit. 24" is the cabinet depth in 
most installations. 

Follow the cut-out drawing The 15-1/4" width allows 1/4" for ease 
in installation and removal of the unit. 24" is the cabinet depth in 
most installations. 

8"

24"

Minimum

24-1/4"

See Electrical
Specifications

for Power Supply

34-1/4"

to

35-1/8"

See Electrical
Specifications

for Power Supply

34-1/4"

to

35-1/8"

15-1/4"

8"

24"

Follow the cut-out drawing. The 21-1/16" width allows 1/4" for 
ease in installation and removal of the unit. 24" is the counter 
depth in most installations. The unit is 24" deep including the door 
and handle.

8"

24"

Minimum

21-1/16"

See Electrical
Specifications

for Power Supply

Typical

Counter

Height

34-1/4"

to

35-1/8"

Cut-Out

Height

28-5/8"

to

28-7/8"

Filler Panel (Not Provided by U-Line) –

May Be Added Above or Below Unit

to Enclose for a Built-In Look