Newcon Optik lam 3 ir ユーザーズマニュアル
11
4. OPERATION INSTRUCTIONS
DANGER! THIS LASER EQUIPMENT IS
HAZARDOUS FOR YOUR EYES!
Do not look into laser beam with naked eyes or
through any optical device.
Do not point an active unit at highly reflective
surfaces or towards other individuals or animals.
Battery installation
Ensure the mode switch (13, Fig. 2) is in OFF
position.
Unscrew battery compartment cover (6, Fig. 1) and
insert the battery observing the polarity marked on
the body. Screw back the cap (6, Fig. 1) tightly.
the body. Screw back the cap (6, Fig. 1) tightly.
When installing battery pay attention to the O-ring
condition. It should have no visible defects to ensure
waterproofing ability. Replace the O-ring if it is worn or
torn.
condition. It should have no visible defects to ensure
waterproofing ability. Replace the O-ring if it is worn or
torn.