Newcon Optik lam 3 ir ユーザーズマニュアル
17
If LAM was exposed to salt water it should be rinsed in
fresh water and dried outside at no more than 55
fresh water and dried outside at no more than 55
o
C.
Long-term storage
When preparing for long-term storage, cover the external
metal surfaces of LAM with protective lubricant. Each 4
(four) years old layer of lubricant should be removed and
new layer be applied.
metal surfaces of LAM with protective lubricant. Each 4
(four) years old layer of lubricant should be removed and
new layer be applied.
To remove old layer of lubricant:
-
-
Wipe LAM with clean dry cloth,
-
Degrease metal surfaces of LAM with benzene
moistened cloth,
moistened cloth,
-
Dry LAM out-of-doors.
Do not touch unit’s metal surfaces with fingers after
cleaning.
To apply new layer of lubricant:
-
-
Within two hours from the cleaning apply an
even 0.2-0.5 mm thick layer of lubricant on
metal surfaces with a brush.
even 0.2-0.5 mm thick layer of lubricant on
metal surfaces with a brush.
-
Do not cover plastic parts.