Kenwood dnx7210bt ユーザーズマニュアル
90
90
91
NOTE
• Make fine adjustment of the delay time of the
speaker output specified here to have a more
suitable environment for your vehicle.
suitable environment for your vehicle.
• If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1
the delay time will be automatically computed
and set.
1
Determine the center of the currently set
listening position as the reference point.
2
Measure the distances from the reference
point to the speakers.
3
Calculate the differences between the distance
of the furthest speaker and other speakers.
4
Input the differences calculated in step 3 for
individual speakers.
5
Adjust gain for individual speakers. A sound
image will be shifted to the speaker with
increased gain.
increased gain.
Example: When [Front All] is selected as the
listening position
50cm
80cm
150cm
+70cm
+0cm
+100cm
Listening Position
You can adjust the sound effects according
to your listening position.
to your listening position.
1
Touch [Position].
Position screen appears.
2
Select listening position from
[Front R] (Right front), [Front L] (Left
front), [Front All] (All front), and [All]
using [
[Front R] (Right front), [Front L] (Left
front), [Front All] (All front), and [All]
using [
2] and [3].
Position DTA Control
You can fine-adjust your listening position.
1
In Position screen, touch [Adjust].
2
Select the speaker you wish to adjust
by touching speaker icon.
by touching speaker icon.
3
Set DTA as follows.
[
2], [3]
Adjust the settings of the DTA position.
Gain
Touch to adjust the gain of each speaker.
Gain
Touch to adjust the gain of each speaker.