Konica Minolta dimage x50 ユーザーズマニュアル
101
If the camera does not function normally, turn it off, remove and reinsert the battery, or unplug and
reconnect the AC adapter set. Always turn the camera off using the main switch otherwise the
memory card may be damaged and camera settings reset.
reconnect the AC adapter set. Always turn the camera off using the main switch otherwise the
memory card may be damaged and camera settings reset.
Pictures are
not sharp.
not sharp.
Subject is too close.
Make sure the subject is within
the autofocus range (p.
the autofocus range (p.
26
) or use
the macro mode (p.
30
).
A special situation is pre-
venting the autofocus sys-
tem from focusing (p.
venting the autofocus sys-
tem from focusing (p.
27
).
Use the focus-lock function to
focus on an object at the same
distance as the subject (p.
focus on an object at the same
distance as the subject (p.
26
).
Pictures are
taken indoors
or in low-light
situations with-
out flash.
taken indoors
or in low-light
situations with-
out flash.
Slow shutter speeds result
in blurred images when
the camera is hand-held.
in blurred images when
the camera is hand-held.
Use a tripod, change the camera
sensitivity to a higher setting (p.
sensitivity to a higher setting (p.
46
), or use the flash (p.
28
).
The subject is beyond the flash range
(p.
(p.
46
).
Move closer to the subject or
change the camera sensitivity to
a higher setting (p.
change the camera sensitivity to
a higher setting (p.
46
).
Focus signal is
red.
red.
While using
flash, the pic-
tures are too
dark.
flash, the pic-
tures are too
dark.
ABOUT THE LITHIUM-ION BATTERY CHARGER CORD
The included AC cord is designed for the current of the sales region. Only use the cord in the region
it was purchased.
it was purchased.
Region
Product code
Continental Europe, China, Korea, Singapore (220-240V)
APC-110
Great Britain, Hong Kong (220V-240V)
APC-120
United States, Canada, Taiwan (110V-120V)
APC-130
Japan (100V)
APC-140