Konica Minolta DiMAGE E201 ユーザーズマニュアル

SELF-PORTRAITS (Self-timer)

The self-timer will delay the release of the shutter for approximately 10 seconds after
the shutter-release button has been pressed. The digital zoom, flash, exposure
compensation, and macro mode can be used.

Place the camera on a tripod and turn the
function dial to 

to set the self-timer.

Arrange the camera and subject to
compose the picture. Frame the picture as
instructed in step 1 and 2 of the basic
recording operation section on page 27.

• If the subject is outside the focus frame, use

the focus-lock function (p. 28).

Press the shutter-release button all the
way down to start the self-timer.

• The self-timer lamp on the front of the

camera will blink slowly for eight seconds; it
will start to blink rapidly and then glow
steadily just before the shutter releases.

• Do not press the shutter-release button while

standing in front of the camera. When the
shutter button is pressed, focus and exposure
for the picture is set.

• To cancel the countdown, turn the function

dial to another position. Turning off the
camera will also cancel the countdown.