Konica Minolta pi3505e ps driver ver1 ユーザーズマニュアル
3
Network Settings
3-8
Pi3505e/PS Printer Driver
Configuration Procedure (Windows 2000/XP/Server 2003)
1
Install TCP/IP under Windows 2000/XP/Server 2003.
Refer to the applicable Windows documentation for more information.
2
Assign the IP parameters.
See “Specifying the IP Address From the Copier’s Touch Panel” on
page 3-2 for more information.
page 3-2 for more information.
3
Use the procedure below to install the printer.
Installing the printer (Windows 2000/XP/Server 2003)
1
Install the printer driver following the instructions that come with the
installer. Make the new printer the default printer.
installer. Make the new printer the default printer.
2
Right-click the new printer icon and select
Properties
from the menu.
3
Display the
Ports
tab.
4
Click
Add Port
.
This displays a list of available port types.
5
Select
Standard TCP/IP Port
from the list, and then click
New Port
.
This starts
Add Standard TCP/IP Printer Port Wizard
.
6
Click
Next
on the introduction page of the wizard.
7
On the
Add Port
page, type the IP address of the Network Card into
the
Printer Name or IP Address
box.
If the network you are on uses DNS (Domain Name Services), type in
the DNS name instead of the IP address.
the DNS name instead of the IP address.
8
Type the name of the port you want into the
Port Name
box, and then
click
Next
.
Note
When you type the IP address into the
When you type the IP address into the
Printer Name or IP
Address
box, the name of the port is automatically entered in the
Port Name
box as IP_<IP address>, but you can change the port
name as you want.