Konica Minolta su-501 ph2-5 um 1-1-0 ユーザーズマニュアル
IP Relay operations
6
bizhub 350/250 (Phase 2.5)
6-3
6
IP Relay operations
6.1
Before transmitting
Perform the following operations before using the IP Relay operation. Specify
the following settings to use this machine to send the command for sending
a fax relayed through another machine.
the following settings to use this machine to send the command for sending
a fax relayed through another machine.
Setting “Gateway TX” to “Restrict”
Set "Gateway TX" in the Scanner Settings screen (displayed by touching
[Admin. 2] - [Network Settings] - [Network Setting1]) to "Restrict".
[Admin. 2] - [Network Settings] - [Network Setting1]) to "Restrict".
!
Detail
If this machine is to be used as a relay machine, set "Gateway TX" to
"Allow". For details on using this machine as a relay machine, refer to the
User manual [Facsimile Operations].
"Allow". For details on using this machine as a relay machine, refer to the
User manual [Facsimile Operations].
Incorrect transmissions to unintended recipients can be prevented. For
details, refer to "Specifying software switch settings (machine functions)"
on page 8-11.
details, refer to "Specifying software switch settings (machine functions)"
on page 8-11.
Specifying settings for relay stations
Specify the IP address and domain name of the relay machines. Select relay
machines that are connected to the general telephone line. For details, refer
to the following pages.
machines that are connected to the general telephone line. For details, refer
to the following pages.
To specify the settings from this machine’s control panel, refer to "IP Relay
Settings" on page 8-6.
Settings" on page 8-6.
To specify the settings from PageScope Web Connection, refer to "IP Relay
Settings (Administrator mode)" on page 7-29.
Settings (Administrator mode)" on page 7-29.