Konica Minolta su-501 ph2-5 um 1-1-0 ユーザーズマニュアル
8
Specifying management settings
8-20
bizhub 350/250 (Phase 2.5)
Specifying whether transmission source information is added when
directly faxing, performing an IP relay operation, or forwarding received
documents (mode 352)
directly faxing, performing an IP relay operation, or forwarding received
documents (mode 352)
Specify how transmission source information is added when directly faxing,
performing an IP relay operation, or forwarding received documents.
performing an IP relay operation, or forwarding received documents.
Settings at time of purchase
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected.
selected.
Bit
7 6 5 4 3 2 1 0
Setting
1 1 0 1 0 0 0 0 (HEX: D0)
Bit
Description
Setting
Description
Page Refer-
ence
ence
7
--------------------------
1
*Do not change this bit
when specifying settings
for this function.
when specifying settings
for this function.
----------
6
Specifies where trans-
mission source infor-
mation is added with
direct faxing and IP re-
lay operations.
mission source infor-
mation is added with
direct faxing and IP re-
lay operations.
0
Outside of the document
----------
1
Inside the document
5
Specifies whether or
not a transmission
source information is
added to received
documents that are
forwarded.
not a transmission
source information is
added to received
documents that are
forwarded.
0
Not added
----------
1
Added
4
Specifies how trans-
mission source infor-
mation is added when
a received document
is forwarded.
mission source infor-
mation is added when
a received document
is forwarded.
0
Outside of the document
----------
1
Inside the document
3, 2, 1, 0
--------------------------
0000
*Do not change these bits
when specifying setting for
this function.
when specifying setting for
this function.
----------