ZyXEL Communications 470 ユーザーズマニュアル
Chapter 3 Managing Your PLA-4xx
PLA-4xx Series User’s Guide
27
"
Use the
icon to view online help information in each screen of the utility.
Figure 14 Configuration Screen
The following table describes the labels in this screen.
Table 2 Configuration Screen
LABEL
DESCRIPTION
Network
Topology
Use this to select which powerline network information is displayed. Different
powerline networks are identified by the Ethernet interface (network card) connected
directly to the PLA-4xx. Typically there is only one connection, however, if your
computer has two network cards and both are connected to a PLA-4xx then you have
two powerline networks.
The fields described below are used to identify the PLA-4xxs and other powerline adapters recognized
on the powerline network. The configuration utility automatically updates this information every 10
seconds. Click Scan to refresh the information in these fields (immediately).
Note: Only devices which share the same network password are displayed in
this table.
Site
This field displays
•
•
Local, if it is identifying the PLA-4xx directly connected to the computer running
the configuration utility.
•
Remote, if it is a powerline adapter in your powerline network but not directly
connected to the computer running the configuration utility.
MAC Address
This is a read-only field which shows the MAC address of the powerline adapter you
are configuring. You can find the MAC address of your PLA-4xx displayed on a sticker
on the bottom of your device.