Kenwood TH-G71E ユーザーズマニュアル

ページ / 60
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
26
VFO SCAN
VFO Scan allows you to scan all frequencies from the
lowest frequency to the highest frequency on the band.
The current frequency step size {page 40} is used.
Select the desired band.
Press [VFO] (1 s).
• The 1 MHz decimal blinks while scanning is in progress.
• Scan starts at the frequency currently displayed.
• To reverse the scan direction, turn the Tuning control
clockwise (upward scan) or counterclockwise (downward
scan).
To quit VFO Scan, press any key other than [LAMP],
[MONI], and [F].
Note:
  The squelch must be closed for Scan to function.
MEMORY SCAN
Memory Scan allows all memory channels containing
data to be scanned.
Press [MR] (1 s).
• The 1 MHz decimal blinks while scanning is in progress.
• Scan starts with the channel last recalled.
• To reverse the scan direction, turn the Tuning control
clockwise (upward scan) or counterclockwise
(downward scan).
To quit Memory Scan, press any key other than
[LAMP][MONI], and [F].
Note:
At least 2 or more memory channels must contain data and must not
be locked out.
The squelch must be closed for Scan to function.
The L0 to L9 and U0 to U9 memory channels and the priority channel
are not scanned.
You can also start Memory Scan when in Channel Display mode.
While Scan is being interrupted, the channel number blinks.
If you select “ONE” using Menu No. 2 (MR), memory channels on
only the current band will be scanned; otherwise, memory channels
on both VHF and UHF bands will be scanned.