Vulcan Materials vulcan g60c ユーザーズマニュアル

F35425 (October 2005)

Page 6 of 23

WARNING:  DISCONNECT  THE
ELECTRICAL  POWER  TO  THE
MACHINE  AND  FOLLOW  LOCKOUT /
TAGOUT  PROCEDURES.

WARNING:  SHUT  OFF  THE  GAS  BEFORE
SERVICING  THE  UNIT.

WARNING:  ALL  GAS  JOINTS  DISTURBED
DURING  SERVICING  MUST  BE  CHECKED  FOR
LEAKS.  CHECK  WITH  A  SOAP  AND  WATER
SOLUTION  (BUBBLES).  DO  NOT  USE  AN
OPEN  FLAME.

The oven control valve is located to the front left of
the oven.

1.

Remove the oven control panel as outlined

under PANELS AND COVERS.

2.

Remove the three bracket screws attaching the

thermocouple valve mounting bracket to the
range.

ENDURANCE SERIES GAS RANGES - REMOVAL AND REPLACEMENT OF PARTS

3.

Remove the two screws attaching the bracket to

the thermocouple.

4.

Open the oven door.

5.

Remove capillary tube from all routing clips.

NOTE: When straightening the capillary tube be sure
not to place kinks in tubing.