Vulcan Materials cem20u ml-138078 ユーザーズマニュアル

— 12 —

The Oven Vent Valve opens or closes the Vent
to adjust the amount of  steam venting from the
oven. Pull the Oven Vent Valve out to open it.
Push it in to close it.

When the Oven Convection Fan is on, the LED
will be illuminated. The Oven Convection Fan
can be used to rapidly lower the oven
temperature. The Oven Timer Adjustment Knob
must be set to continuous, or a specific time
must be set, and the door must be closed in
order for the Oven Convection Fan to operate.

For quicker cool down, press the Humidity
Control button twice. This injects approximately
5 gal/h of water into the oven, cooling it faster.

The Cooking Selector Knob has seven
selectable positions corresponding to the
different cooking modes of the oven, or the off
position as shown. When a cooking mode is
selected, the respective LED light will flash
and after a few seconds, the control panel will
illuminate, indicating that the oven is prepared
for cooking.

NOTE: Select the desired cooking mode at

least ten minutes prior to cooking to
allow the oven to pre-heat and be
ready for cooking.