VTech cs6120-2 ユーザーズマニュアル

This quick start guide provides you with the basic installation 

instructions. A limited set of features are described in 

abbreviated form.
Please refer to the online user’s manual for complete installation 

and operation instructions.

Install the telephone base and charger as shown below.

Use only the power adapters and batteries supplied with  

this product.

Install the battery as shown below. Once you have installed the 

battery, you may be able to make and receive short calls. For best 

performance, charge the handset battery continuously for at least 

16 hours.

1  Plug the battery connector 

securely into the socket.

2  Place the battery with the 

wires inside the battery 

compartment.

3  Slide the battery 

compartment cover towards 

the center of the handset 

until it clicks into place.

4  Charge the handset in the 

telephone base or charger.

Charge light 

remains on 

when charging.

Press 

MeNU when the phone is not in use.

Press 

CID or 

 until the screen displays the desired  

feature menu.
Press 

SeLeCT to enter that menu.

To return to the previous menu, press 

CaNCeL.

To return to idle mode, press and hold 

CaNCeL.

Press 

MeNU when the handset is not in use.

Scroll to 

Settings then press SeLeCT.

Scroll to 

Set date/time then press SeLeCT.

Use the dialing keys (

0-9) to enter the current month, date and 

year. Then press 

SeLeCT.

Use the dialing keys (

0-9) to enter the hour and minute. Then 

press 

CID or 

 to select 

aM or PM.

Press 

SeLeCT to save.

1.
2.

3.
•
•

1.
2.
3.
4.

5.

6.

IMPOrTaNT!
Refer to the online user’s manual for a full set of installation and 

operation instructions. For manual download or customer service, 

visit our website at www.vtechphones.com or call  

1 (800) 595-9511. In Canada, go to www.vtechcanada.com  

or call 1 (800) 267-7377.

Copyright © 2011 for VTECH TELECOMMUNICATIONS LTD.
All rights reserved. Printed in China.

96-007701-050-100

You can set the answering system to answer an incoming call  

after 2, 3, 4, 5 or 6 rings; or toll saver. If you choose toll saver,  

the answering system answers a call after 2 rings when you  

have new messages, or after 4 rings when you have no  

new messages.

Press 

MeNU when the handset is not in use.

Scroll to 

answering sys then press SeLeCT.

Scroll to 

ans sys setup then press SeLeCT.

Scroll to 

# of rings then press SeLeCT.

Press 

CID or 

 to choose 

6, 5, 4, 3, 2 or Toll saver and 

then press 

SeLeCT to save.

You can use the preset announcement to answer calls, or replace it 

with your own recorded announcement. The announcement can be 

up to 90 seconds in length.

Press 

MeNU when the handset is not in use.

Scroll to 

answering Sys then press SeLeCT twice.

Press 

7 to record.

After the handset announces, 

when you are done,”  speak towards the handset microphone.
Press 

5 when done.

Press 

2 to play the recorded announcement; or 7 to record 

again if desired. Press 

3 to delete the recorded announcement. 

Press 

5 to stop the playback at any time.

1.
2.
3.
4.
5.

1.
2.
3.
4.

5.
6.

Telephone base

Telephone 

line cord

Electrical outlet 

(not controlled by 

a wall switch)

Telephone wall jack

A DSL filter 

(not included) 

is required if 

you have DSL  

high-speed 

Internet service

Telephone base 

power adapter

Charger

Charger 

adapter