Havis-Shields kk-k9-c13-k-32 ユーザーズマニュアル

 

TOOLS REQUIRED: 
Power drill 
Drill bit set 
Standard & metric socket sets 
Phillips screwdriver 

Open-end wrench set 
Wire cutters / Crimping tool 
Ratcheting wrench

 

 

20 

¼-20 x ½” Stainless Carriage Bolts  

GSM32022 

 

30 

¼-20 x ¾” Stainless Carriage Bolts  

GSM32024 

 

50 

¼-20 Hex Flange Serrated Nuts Zinc  

GSM30023 

 

6 

¼” x 1” Hex Head Lag Bolt  

GSM33060 

 

22 

#12 x ¾” Stainless Sheet Metal Screws  

GSM34177 

 

24 

#10 x ¾” Sheet Metal Screws Stainless  

GSM34170 

 

12 

#10 x ½” Sheet Metal Screws Stainless  

GSM34169 

 

10 

10-32 x ¾” Machine Screw Screws Stainless  

GSM34098 

 

6 

#10 x ¾” Sheet Metal Screws Zinc  

GSM33195 

 

1 

Tube Silver Caulk  

PRM97343 

 

1 

32” x 45” x ½” Rubber Mat  

KNM01029 

! 

¾  Read all instructions before installing any Havis-Shields Equipment Corp products. 
¾  Disconnect the vehicle battery. Removing seat bolts on some vehicles may give the vehicles 

computer a false reading, causing a warning light on the instrument cluster. This requires the 
vehicles’ computer to be reset with a vehicle diagnostics tool. 

¾  Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes! 
¾  Use only hardware provided with install kit. 
¾  For product support, visit the Install Instructions Section of our website at 

 or call 1-800-

524-9900 and ask for technical support.  

•  Mount dome light to ceiling and attach wire 

•  Remove rear seats and door panels. 
•  Remove trim panels around the rear door opening to minimize damage while sliding main 

housing assembly into the vehicle. 

•  Attach rear housing extension plate to K9 floor using ¼” x ¾” Carriage bolts and serrated 

nuts. The carriage bolt will go up from the bottom. It may be necessary to drill holes to 
accommodate the extension plate due to the various models.