eutech-instruments ecoscan temp 456 temperature meter ユーザーズマニュアル

Instruction Manual  

                                                           Temp 4/5/6 

 

1

Thank you for purchasing the Temp 4/5/6 meter.  These microprocessor-based 
handheld meters are economical and easy to use. They are available in three 
models:  

•  The Temp 4 uses *YSI 400 series thermistor temperature sensor 

•  The Temp 5 uses 100K thermistor temperature sensor 

•  The Temp 6 uses PT100 ohm (Platinum) RTD temperature sensor 

 

All Temp 4/5/6 meter series feature: 

•  Large LCD for clear and easy reading 
• Readings 

in 

o

C and 

o

F (selectable) 

•  Minimum and maximum temperature display 
•  Minimum and maximum hold mode 
•  Low battery indicator 
•  Hold function, freezes measured reading 
•  User calibration - offset adjustment 
•  Non volatile memory backup; calibration and other information remain if 

battery is disconnected 

•  Temp 5 meter allows user selection of most suitable temperature curve for 

its thermistor sensor 

 

This instruction manual is organised for quick reference with step-by-step 
procedures that give you thorough review of the various features and meter 
operations.  

Included with your meter are a temperature sensor (Temp 5 only), rubber boot, 
4 alkaline “AAA” batteries, an instruction manual and a warranty card. To order 
other accessories, please refer to Section on Accessories for more information. 

* YSI is a registered trademark of Yellow Springs Instruments.